It has many rules governing it's position and size and so getting the belts to go through into the driver compartment is a tricky process. Also because we don't want to destroy the seat and cut holes where we don't need them it's hard to start to make cuts and holes when you really need the seat fully mounted in the chassis with a driver sitting in it to know exactly where these all go.
With the chassis unable to be soley used to mock this up at this late stage it is a bit of a guessing game, the solid works design used a model of a driver but there really is nothing liek the real thing so you can't trust this 100%.
Also makig life a little harder is the fact that the harness mounts are 30mm out of position due to a manufacturing error, it is too late to re-make these so we are using what we got but the seconday problems are just becoming a little be-motivating and slowing progress down.
I have decided that we are jst going to have t cut holes as best we can and keep cutting and shaping them till the seat sits right, we still have the mould so if need be we can add some patching to the composite lay-up later down the track once we know the belts will go where we want and comply with the rules.
Here is a few pics of the progress over the weekend...slow but now we have a pretty good game plan written down with a list of priorities to get done by our car launch this Friday, we just need it to be sitting in the car with belts through it so it looks the business, we can finalise the hard mounting points later.
Oh did I mention we all have exams over the next 3 weeks and the car goe on a truck to melbourne on the last day of exams ? This is the most fun you will have in you're engineering degree.
 |
| Above I use a drill bit that has the milling type teeth on it's shank so that I can easily cut complex curves. I start with lots of holes around the perimeter on the inside of where I want the final cut. I then mill between the holes joining them all up using the sideways cutting ability of the drill bit. Then I get a nice sharp half-round file and try to neaten up the edge. It works fairly well and is the most effective method I have found to do this type of work, I have been involved in the seat making in '08, '09 and this year so I'll building a knowledge of what NOT to do by making mistakes.....some would call it learning. Still got a lot to learn and still making mistakes but thats life, we do what we can. |
Above test fitting the belt holes in the seat to see what will work and where we need adjustment. The lap belt holes (on the sides) should be ok I have marked where they need to be enlarged for the haress clips to fit through. The submarine (crotch) strap does fit through the opening but the belts will slightly rub on the seat at the moment which is no good, either have to cut the holes more to taper a slot towards the mount to enable a good angle of wrap around the drivers thighs or add a steel tube bar that just touches the underside of the seat, the belts would wrap around this so that they have a nice smooth radius transition up towards the driver, just have to ensure a good wrap around the drivers legs again though.
